1963 Austin Princess vs. 1973 Plymouth Barracuda

To start off, 1973 Plymouth Barracuda is newer by 10 year(s). Which means there will be less support and parts availability for 1963 Austin Princess. In addition, the cost of maintenance, including insurance, on 1963 Austin Princess would be higher. At 3,992 cc (6 cylinders), 1963 Austin Princess is equipped with a bigger engine. In terms of performance, 1963 Austin Princess (118 HP @ 4000 RPM) has 10 more horse power than 1973 Plymouth Barracuda. (108 HP @ 4000 RPM). In normal driving conditions, 1963 Austin Princess should accelerate faster than 1973 Plymouth Barracuda. With that said, vehicle weight also plays an important factor in acceleration. 1963 Austin Princess weights approximately 775 kg more than 1973 Plymouth Barracuda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 251 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.

Compare all specifications:

1963 Austin Princess 1973 Plymouth Barracuda
Make Austin Plymouth
Model Princess Barracuda
Year Released 1963 1973
Engine Position Front Front
Engine Size 3992 cc 3686 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 118 HP 108 HP
Engine RPM 4000 RPM 4000 RPM
Torque 251 Nm 251 Nm
Torque RPM 2000 RPM 2400 RPM
Engine Compression Ratio 8.5:1 8.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 2180 kg 1405 kg
Vehicle Length 5470 mm 4750 mm
Vehicle Width 1900 mm 1910 mm
Vehicle Height 1780 mm 1310 mm
Wheelbase Size 3360 mm 2760 mm