1963 Austin Princess vs. 2012 Opel Insignia

To start off, 2012 Opel Insignia is newer by 49 year(s). Which means there will be less support and parts availability for 1963 Austin Princess. In addition, the cost of maintenance, including insurance, on 1963 Austin Princess would be higher. At 3,992 cc (6 cylinders), 1963 Austin Princess is equipped with a bigger engine. In terms of performance, 2012 Opel Insignia (138 HP @ 6300 RPM) has 20 more horse power than 1963 Austin Princess. (118 HP @ 4000 RPM) In normal driving conditions, 2012 Opel Insignia should accelerate faster than 1963 Austin Princess.

Because 1963 Austin Princess is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Austin Princess. However, in wet, icy, snow, or gravel driving conditions, 2012 Opel Insignia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Austin Princess (251 Nm @ 2000 RPM) has 76 more torque (in Nm) than 2012 Opel Insignia. (175 Nm @ 3800 RPM). This means 1963 Austin Princess will have an easier job in driving up hills or pulling heavy equipment than 2012 Opel Insignia.

Compare all specifications:

1963 Austin Princess 2012 Opel Insignia
Make Austin Opel
Model Princess Insignia
Year Released 1963 2012
Engine Position Front Front
Engine Size 3992 cc 1796 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 118 HP 138 HP
Engine RPM 4000 RPM 6300 RPM
Torque 251 Nm 175 Nm
Torque RPM 2000 RPM 3800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Doors 4 doors 4 doors
Vehicle Length 5470 mm 4830 mm
Vehicle Width 1900 mm 1856 mm
Vehicle Height 1780 mm 1498 mm
Wheelbase Size 3360 mm 2737 mm