1963 Cadillac Sixty vs. 1980 Ford Crown Victoria

To start off, 1980 Ford Crown Victoria is newer by 17 year(s). Which means there will be less support and parts availability for 1963 Cadillac Sixty. In addition, the cost of maintenance, including insurance, on 1963 Cadillac Sixty would be higher. At 6,390 cc (8 cylinders), 1963 Cadillac Sixty is equipped with a bigger engine. In terms of performance, 1963 Cadillac Sixty (197 HP @ 4800 RPM) has 79 more horse power than 1980 Ford Crown Victoria. (118 HP @ 3800 RPM). In normal driving conditions, 1963 Cadillac Sixty should accelerate faster than 1980 Ford Crown Victoria. With that said, vehicle weight also plays an important factor in acceleration. 1963 Cadillac Sixty weights approximately 495 kg more than 1980 Ford Crown Victoria. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Cadillac Sixty (582 Nm) has 320 more torque (in Nm) than 1980 Ford Crown Victoria. (262 Nm). This means 1963 Cadillac Sixty will have an easier job in driving up hills or pulling heavy equipment than 1980 Ford Crown Victoria.

Compare all specifications:

1963 Cadillac Sixty 1980 Ford Crown Victoria
Make Cadillac Ford
Model Sixty Crown Victoria
Year Released 1963 1980
Engine Position Front Front
Engine Size 6390 cc 4186 cc
Engine Cylinders 8 cylinders 8 cylinders
Engine Type V in-line
Horse Power 197 HP 118 HP
Engine RPM 4800 RPM 3800 RPM
Torque 582 Nm 262 Nm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Doors 2 doors 4 doors
Vehicle Weight 2125 kg 1630 kg
Vehicle Length 5670 mm 5320 mm
Vehicle Height 1370 mm 1390 mm
Wheelbase Size 3300 mm 2910 mm