1963 Ferrari 250 GTE vs. 1981 Subaru Coupe

To start off, 1981 Subaru Coupe is newer by 18 year(s). Which means there will be less support and parts availability for 1963 Ferrari 250 GTE. In addition, the cost of maintenance, including insurance, on 1963 Ferrari 250 GTE would be higher. At 2,951 cc (12 cylinders), 1963 Ferrari 250 GTE is equipped with a bigger engine. In terms of performance, 1963 Ferrari 250 GTE (235 HP @ 7000 RPM) has 168 more horse power than 1981 Subaru Coupe. (67 HP @ 5200 RPM). In normal driving conditions, 1963 Ferrari 250 GTE should accelerate faster than 1981 Subaru Coupe. With that said, vehicle weight also plays an important factor in acceleration. 1963 Ferrari 250 GTE weights approximately 515 kg more than 1981 Subaru Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1963 Ferrari 250 GTE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Ferrari 250 GTE. However, in wet, icy, snow, or gravel driving conditions, 1981 Subaru Coupe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Ferrari 250 GTE (245 Nm @ 5000 RPM) has 131 more torque (in Nm) than 1981 Subaru Coupe. (114 Nm @ 2400 RPM). This means 1963 Ferrari 250 GTE will have an easier job in driving up hills or pulling heavy equipment than 1981 Subaru Coupe. 1981 Subaru Coupe has automatic transmission and 1963 Ferrari 250 GTE has manual transmission. 1963 Ferrari 250 GTE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1981 Subaru Coupe will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Ferrari 250 GTE 1981 Subaru Coupe
Make Ferrari Subaru
Model 250 GTE Coupe
Year Released 1963 1981
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 2951 cc 1593 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Horse Power 235 HP 67 HP
Engine RPM 7000 RPM 5200 RPM
Torque 245 Nm 114 Nm
Torque RPM 5000 RPM 2400 RPM
Engine Bore Size 73 mm 91.9 mm
Engine Stroke Size 58.8 mm 60 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Vehicle Weight 1430 kg 915 kg
Vehicle Length 4710 mm 4160 mm
Vehicle Width 1780 mm 1620 mm
Vehicle Height 1370 mm 1360 mm
Wheelbase Size 2610 mm 2470 mm