1963 Ferrari 250 GTE vs. 2000 Peugeot 607
To start off, 2000 Peugeot 607 is newer by 37 year(s). Which means there will be less support and parts availability for 1963 Ferrari 250 GTE. In addition, the cost of maintenance, including insurance, on 1963 Ferrari 250 GTE would be higher. At 2,951 cc (12 cylinders), 1963 Ferrari 250 GTE is equipped with a bigger engine. In terms of performance, 1963 Ferrari 250 GTE (235 HP @ 7000 RPM) has 75 more horse power than 2000 Peugeot 607. (160 HP @ 5800 RPM). In normal driving conditions, 1963 Ferrari 250 GTE should accelerate faster than 2000 Peugeot 607. With that said, vehicle weight also plays an important factor in acceleration. 1963 Ferrari 250 GTE weights approximately 20 kg more than 2000 Peugeot 607. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Ferrari 250 GTE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Ferrari 250 GTE. However, in wet, icy, snow, or gravel driving conditions, 2000 Peugeot 607, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Ferrari 250 GTE (245 Nm @ 5000 RPM) has 28 more torque (in Nm) than 2000 Peugeot 607. (217 Nm @ 3900 RPM). This means 1963 Ferrari 250 GTE will have an easier job in driving up hills or pulling heavy equipment than 2000 Peugeot 607. 2000 Peugeot 607 has automatic transmission and 1963 Ferrari 250 GTE has manual transmission. 1963 Ferrari 250 GTE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Peugeot 607 will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Ferrari 250 GTE | 2000 Peugeot 607 | |
Make | Ferrari | Peugeot |
Model | 250 GTE | 607 |
Year Released | 1963 | 2000 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 2951 cc | 2230 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 235 HP | 160 HP |
Engine RPM | 7000 RPM | 5800 RPM |
Torque | 245 Nm | 217 Nm |
Torque RPM | 5000 RPM | 3900 RPM |
Engine Bore Size | 73 mm | 86 mm |
Engine Stroke Size | 58.8 mm | 96 mm |
Engine Compression Ratio | 9.2:1 | 11.0:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 230 km/hour | 213 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1430 kg | 1410 kg |
Vehicle Length | 4710 mm | 4880 mm |
Vehicle Width | 1780 mm | 1840 mm |
Vehicle Height | 1370 mm | 1470 mm |
Wheelbase Size | 2610 mm | 2610 mm |
Fuel Tank Capacity | 140 L | 66 L |