1963 Ferrari 250 GTE vs. 2002 Hyundai HCD-7
To start off, 2002 Hyundai HCD-7 is newer by 39 year(s). Which means there will be less support and parts availability for 1963 Ferrari 250 GTE. In addition, the cost of maintenance, including insurance, on 1963 Ferrari 250 GTE would be higher. At 4,498 cc (8 cylinders), 2002 Hyundai HCD-7 is equipped with a bigger engine. In terms of performance, 2002 Hyundai HCD-7 (270 HP @ 5500 RPM) has 35 more horse power than 1963 Ferrari 250 GTE. (235 HP @ 7000 RPM) In normal driving conditions, 2002 Hyundai HCD-7 should accelerate faster than 1963 Ferrari 250 GTE. With that said, vehicle weight also plays an important factor in acceleration. 2002 Hyundai HCD-7 weights approximately 260 kg more than 1963 Ferrari 250 GTE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Ferrari 250 GTE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Ferrari 250 GTE. However, in wet, icy, snow, or gravel driving conditions, 2002 Hyundai HCD-7, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Ferrari 250 GTE (245 Nm) has 65 more torque (in Nm) than 2002 Hyundai HCD-7. (180 Nm). This means 1963 Ferrari 250 GTE will have an easier job in driving up hills or pulling heavy equipment than 2002 Hyundai HCD-7. 2002 Hyundai HCD-7 has automatic transmission and 1963 Ferrari 250 GTE has manual transmission. 1963 Ferrari 250 GTE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Hyundai HCD-7 will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Ferrari 250 GTE | 2002 Hyundai HCD-7 | |
Make | Ferrari | Hyundai |
Model | 250 GTE | HCD-7 |
Year Released | 1963 | 2002 |
Engine Position | Front | Front |
Engine Size | 2951 cc | 4498 cc |
Engine Cylinders | 12 cylinders | 8 cylinders |
Engine Type | V | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 235 HP | 270 HP |
Engine RPM | 7000 RPM | 5500 RPM |
Torque | 245 Nm | 180 Nm |
Engine Bore Size | 73 mm | 86 mm |
Engine Stroke Size | 58.8 mm | 96.8 mm |
Engine Compression Ratio | 9.2:1 | 10.0:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1430 kg | 1690 kg |
Vehicle Length | 4710 mm | 4970 mm |
Vehicle Width | 1780 mm | 1850 mm |
Vehicle Height | 1370 mm | 1440 mm |
Wheelbase Size | 2610 mm | 2840 mm |
Fuel Tank Capacity | 140 L | 80 L |