1963 Ferrari 250 LM vs. 2010 Chrysler PT Cruiser
To start off, 2010 Chrysler PT Cruiser is newer by 47 year(s). Which means there will be less support and parts availability for 1963 Ferrari 250 LM. In addition, the cost of maintenance, including insurance, on 1963 Ferrari 250 LM would be higher. At 3,286 cc (12 cylinders), 1963 Ferrari 250 LM is equipped with a bigger engine. In terms of performance, 1963 Ferrari 250 LM (317 HP @ 7500 RPM) has 175 more horse power than 2010 Chrysler PT Cruiser. (142 HP @ 5200 RPM). In normal driving conditions, 1963 Ferrari 250 LM should accelerate faster than 2010 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler PT Cruiser weights approximately 1060 kg more than 1963 Ferrari 250 LM.
Because 1963 Ferrari 250 LM is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Ferrari 250 LM. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Ferrari 250 LM (314 Nm @ 5500 RPM) has 100 more torque (in Nm) than 2010 Chrysler PT Cruiser. (214 Nm @ 4000 RPM). This means 1963 Ferrari 250 LM will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler PT Cruiser. 2010 Chrysler PT Cruiser has automatic transmission and 1963 Ferrari 250 LM has manual transmission. 1963 Ferrari 250 LM will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Ferrari 250 LM | 2010 Chrysler PT Cruiser | |
Make | Ferrari | Chrysler |
Model | 250 LM | PT Cruiser |
Year Released | 1963 | 2010 |
Body Type | Coupe | Convertible |
Engine Position | Middle | Front |
Engine Size | 3286 cc | 2429 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 317 HP | 142 HP |
Engine RPM | 7500 RPM | 5200 RPM |
Torque | 314 Nm | 214 Nm |
Torque RPM | 5500 RPM | 4000 RPM |
Engine Bore Size | 77 mm | 87.5 mm |
Engine Stroke Size | 58.8 mm | 101 mm |
Fuel Type | Gasoline | Gasoline |
Top Speed | 290 km/hour | 240 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 850 kg | 1910 kg |
Vehicle Length | 4100 mm | 4290 mm |
Vehicle Width | 1710 mm | 1900 mm |
Vehicle Height | 1120 mm | 1550 mm |
Wheelbase Size | 2410 mm | 2620 mm |
Fuel Tank Capacity | 140 L | 57 L |