1963 Fiat 1300 vs. 2010 Chrysler Town & Country
To start off, 2010 Chrysler Town & Country is newer by 47 year(s). Which means there will be less support and parts availability for 1963 Fiat 1300. In addition, the cost of maintenance, including insurance, on 1963 Fiat 1300 would be higher. At 3,300 cc (6 cylinders), 2010 Chrysler Town & Country is equipped with a bigger engine. In terms of performance, 2010 Chrysler Town & Country (175 HP @ 5000 RPM) has 111 more horse power than 1963 Fiat 1300. (64 HP @ 5300 RPM) In normal driving conditions, 2010 Chrysler Town & Country should accelerate faster than 1963 Fiat 1300. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Town & Country weights approximately 1006 kg more than 1963 Fiat 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Fiat 1300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Fiat 1300. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Town & Country, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Town & Country (278 Nm @ 4000 RPM) has 185 more torque (in Nm) than 1963 Fiat 1300. (93 Nm @ 3400 RPM). This means 2010 Chrysler Town & Country will have an easier job in driving up hills or pulling heavy equipment than 1963 Fiat 1300. 2010 Chrysler Town & Country has automatic transmission and 1963 Fiat 1300 has manual transmission. 1963 Fiat 1300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Town & Country will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Fiat 1300 | 2010 Chrysler Town & Country | |
Make | Fiat | Chrysler |
Model | 1300 | Town & Country |
Year Released | 1963 | 2010 |
Engine Position | Front | Front |
Engine Size | 1295 cc | 3300 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 64 HP | 175 HP |
Engine RPM | 5300 RPM | 5000 RPM |
Torque | 93 Nm | 278 Nm |
Torque RPM | 3400 RPM | 4000 RPM |
Fuel Type | Gasoline | Flex Fuel |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 960 kg | 1966 kg |
Vehicle Length | 4040 mm | 5144 mm |
Vehicle Width | 1550 mm | 1953 mm |
Vehicle Height | 1430 mm | 1750 mm |
Wheelbase Size | 2430 mm | 3078 mm |
Fuel Tank Capacity | 37 L | 76 L |