1963 Fiat 2300 vs. 1994 Lancia Kappa

To start off, 1994 Lancia Kappa is newer by 31 year(s). Which means there will be less support and parts availability for 1963 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1963 Fiat 2300 would be higher. At 2,279 cc (6 cylinders), 1963 Fiat 2300 is equipped with a bigger engine. In terms of performance, 1994 Lancia Kappa (145 HP @ 6100 RPM) has 41 more horse power than 1963 Fiat 2300. (104 HP @ 5300 RPM) In normal driving conditions, 1994 Lancia Kappa should accelerate faster than 1963 Fiat 2300. With that said, vehicle weight also plays an important factor in acceleration. 1994 Lancia Kappa weights approximately 136 kg more than 1963 Fiat 2300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1963 Fiat 2300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Fiat 2300. However, in wet, icy, snow, or gravel driving conditions, 1994 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1994 Lancia Kappa (186 Nm @ 4500 RPM) has 19 more torque (in Nm) than 1963 Fiat 2300. (167 Nm @ 2800 RPM). This means 1994 Lancia Kappa will have an easier job in driving up hills or pulling heavy equipment than 1963 Fiat 2300. 1994 Lancia Kappa has automatic transmission and 1963 Fiat 2300 has manual transmission. 1963 Fiat 2300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1994 Lancia Kappa will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Fiat 2300 1994 Lancia Kappa
Make Fiat Lancia
Model 2300 Kappa
Year Released 1963 1994
Engine Position Front Front
Engine Size 2279 cc 1998 cc
Engine Cylinders 6 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 104 HP 145 HP
Engine RPM 5300 RPM 6100 RPM
Torque 167 Nm 186 Nm
Torque RPM 2800 RPM 4500 RPM
Engine Bore Size 78 mm 82 mm
Engine Stroke Size 79.5 mm 75.7 mm
Engine Compression Ratio 8.8:1 10.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1310 kg 1446 kg
Vehicle Length 4630 mm 4690 mm
Vehicle Width 1640 mm 1870 mm
Vehicle Height 1370 mm 1470 mm
Wheelbase Size 2660 mm 2710 mm
Fuel Tank Capacity 70 L 70 L