1963 Fiat 500 vs. 2013 Chrysler 200

To start off, 2013 Chrysler 200 is newer by 50 year(s). Which means there will be less support and parts availability for 1963 Fiat 500. In addition, the cost of maintenance, including insurance, on 1963 Fiat 500 would be higher. At 2,400 cc (4 cylinders), 2013 Chrysler 200 is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 (171 HP @ 6000 RPM) has 149 more horse power than 1963 Fiat 500. (22 HP @ 4400 RPM) In normal driving conditions, 2013 Chrysler 200 should accelerate faster than 1963 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 weights approximately 1058 kg more than 1963 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1963 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 (225 Nm @ 4400 RPM) has 189 more torque (in Nm) than 1963 Fiat 500. (36 Nm @ 3500 RPM). This means 2013 Chrysler 200 will have an easier job in driving up hills or pulling heavy equipment than 1963 Fiat 500. 2013 Chrysler 200 has automatic transmission and 1963 Fiat 500 has manual transmission. 1963 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Fiat 500 2013 Chrysler 200
Make Fiat Chrysler
Model 500 200
Year Released 1963 2013
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 499 cc 2400 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 22 HP 171 HP
Engine RPM 4400 RPM 6000 RPM
Torque 36 Nm 225 Nm
Torque RPM 3500 RPM 4400 RPM
Engine Bore Size 67.4 mm 88 mm
Engine Stroke Size 70 mm 97 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 4-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 485 kg 1543 kg
Vehicle Length 2980 mm 4870 mm
Vehicle Width 1330 mm 2121 mm
Vehicle Height 1330 mm 1482 mm
Wheelbase Size 1850 mm 2765 mm
Fuel Tank Capacity 38 L 64 L