1963 Fiat Berline vs. 1995 Mazda RX-01
To start off, 1995 Mazda RX-01 is newer by 32 year(s). Which means there will be less support and parts availability for 1963 Fiat Berline. In addition, the cost of maintenance, including insurance, on 1963 Fiat Berline would be higher. At 2,614 cc, 1995 Mazda RX-01 is equipped with a bigger engine. In terms of performance, 1995 Mazda RX-01 (220 HP @ 8500 RPM) has 105 more horse power than 1963 Fiat Berline. (115 HP @ 5300 RPM) In normal driving conditions, 1995 Mazda RX-01 should accelerate faster than 1963 Fiat Berline. With that said, vehicle weight also plays an important factor in acceleration. 1963 Fiat Berline weights approximately 170 kg more than 1995 Mazda RX-01.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Mazda RX-01 (216 Nm @ 6000 RPM) has 27 more torque (in Nm) than 1963 Fiat Berline. (189 Nm @ 3000 RPM). This means 1995 Mazda RX-01 will have an easier job in driving up hills or pulling heavy equipment than 1963 Fiat Berline.
Compare all specifications:
1963 Fiat Berline | 1995 Mazda RX-01 | |
Make | Fiat | Mazda |
Model | Berline | RX-01 |
Year Released | 1963 | 1995 |
Engine Position | Front | Front |
Engine Size | 2279 cc | 2614 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 115 HP | 220 HP |
Engine RPM | 5300 RPM | 8500 RPM |
Torque | 189 Nm | 216 Nm |
Torque RPM | 3000 RPM | 6000 RPM |
Drive Type | Rear | Rear |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1270 kg | 1100 kg |
Vehicle Length | 4760 mm | 4060 mm |
Vehicle Width | 1630 mm | 1740 mm |
Vehicle Height | 1490 mm | 1250 mm |
Wheelbase Size | 2660 mm | 2350 mm |
Fuel Tank Capacity | 37 L | 65 L |