1963 Ford Consul vs. 1965 Jensen Interceptor
To start off, 1965 Jensen Interceptor is newer by 2 year(s). Which means there will be less support and parts availability for 1963 Ford Consul. In addition, the cost of maintenance, including insurance, on 1963 Ford Consul would be higher. At 4,473 cc (8 cylinders), 1965 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1965 Jensen Interceptor (238 HP @ 5000 RPM) has 193 more horse power than 1963 Ford Consul. (45 HP @ 4800 RPM) In normal driving conditions, 1965 Jensen Interceptor should accelerate faster than 1963 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 1965 Jensen Interceptor weights approximately 488 kg more than 1963 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1963 Ford Consul | 1965 Jensen Interceptor | |
Make | Ford | Jensen |
Model | Consul | Interceptor |
Year Released | 1963 | 1965 |
Engine Position | Front | Front |
Engine Size | 1198 cc | 4473 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 45 HP | 238 HP |
Engine RPM | 4800 RPM | 5000 RPM |
Engine Bore Size | 81.1 mm | 92.5 mm |
Engine Stroke Size | 58.2 mm | 84.1 mm |
Engine Compression Ratio | 9.0:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 782 kg | 1270 kg |
Vehicle Length | 4280 mm | 4480 mm |
Vehicle Width | 1600 mm | 1760 mm |
Wheelbase Size | 2500 mm | 2600 mm |