1963 Ford Consul vs. 2006 Hyundai Santa Fe
To start off, 2006 Hyundai Santa Fe is newer by 43 year(s). Which means there will be less support and parts availability for 1963 Ford Consul. In addition, the cost of maintenance, including insurance, on 1963 Ford Consul would be higher. At 2,701 cc (6 cylinders), 2006 Hyundai Santa Fe is equipped with a bigger engine. In terms of performance, 2006 Hyundai Santa Fe (170 HP @ 6000 RPM) has 125 more horse power than 1963 Ford Consul. (45 HP @ 4800 RPM) In normal driving conditions, 2006 Hyundai Santa Fe should accelerate faster than 1963 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 2006 Hyundai Santa Fe weights approximately 903 kg more than 1963 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Ford Consul is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Ford Consul. However, in wet, icy, snow, or gravel driving conditions, 2006 Hyundai Santa Fe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Hyundai Santa Fe (245 Nm @ 4000 RPM) has 160 more torque (in Nm) than 1963 Ford Consul. (85 Nm @ 2700 RPM). This means 2006 Hyundai Santa Fe will have an easier job in driving up hills or pulling heavy equipment than 1963 Ford Consul. 2006 Hyundai Santa Fe has automatic transmission and 1963 Ford Consul has manual transmission. 1963 Ford Consul will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Hyundai Santa Fe will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1963 Ford Consul | 2006 Hyundai Santa Fe | |
| Make | Ford | Hyundai |
| Model | Consul | Santa Fe |
| Year Released | 1963 | 2006 |
| Engine Position | Front | Front |
| Engine Size | 1198 cc | 2701 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 45 HP | 170 HP |
| Engine RPM | 4800 RPM | 6000 RPM |
| Torque | 85 Nm | 245 Nm |
| Torque RPM | 2700 RPM | 4000 RPM |
| Engine Bore Size | 81.1 mm | 86.7 mm |
| Engine Stroke Size | 58.2 mm | 75 mm |
| Engine Compression Ratio | 9.0:1 | 10.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 782 kg | 1685 kg |
| Vehicle Length | 4280 mm | 4510 mm |
| Vehicle Width | 1600 mm | 1850 mm |
| Vehicle Height | 1450 mm | 1680 mm |
| Wheelbase Size | 2500 mm | 2630 mm |
| Fuel Tank Capacity | 45 L | 65 L |
