1963 Ford Taunus vs. 1988 Opel Vectra

To start off, 1988 Opel Vectra is newer by 25 year(s). Which means there will be less support and parts availability for 1963 Ford Taunus. In addition, the cost of maintenance, including insurance, on 1963 Ford Taunus would be higher. At 1,396 cc (4 cylinders), 1988 Opel Vectra is equipped with a bigger engine. In terms of performance, 1988 Opel Vectra (73 HP @ 5600 RPM) has 35 more horse power than 1963 Ford Taunus. (38 HP @ 4500 RPM) In normal driving conditions, 1988 Opel Vectra should accelerate faster than 1963 Ford Taunus. With that said, vehicle weight also plays an important factor in acceleration. 1988 Opel Vectra weights approximately 130 kg more than 1963 Ford Taunus. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1963 Ford Taunus is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Ford Taunus. However, in wet, icy, snow, or gravel driving conditions, 1988 Opel Vectra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1963 Ford Taunus 1988 Opel Vectra
Make Ford Opel
Model Taunus Vectra
Year Released 1963 1988
Engine Position Front Front
Engine Size 1183 cc 1396 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 38 HP 73 HP
Engine RPM 4500 RPM 5600 RPM
Torque RPM 2400 RPM 3000 RPM
Engine Compression Ratio 7.8:1 9.4:1
Drive Type Rear Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 845 kg 975 kg
Vehicle Length 4250 mm 4440 mm
Vehicle Width 1600 mm 1710 mm
Vehicle Height 1460 mm 1400 mm
Wheelbase Size 2530 mm 2530 mm
Fuel Tank Capacity 50 L 75 L