1963 Isuzu Bellett vs. 1957 Isuzu Minx
To start off, 1963 Isuzu Bellett is newer by 6 year(s). Which means there will be less support and parts availability for 1957 Isuzu Minx. In addition, the cost of maintenance, including insurance, on 1957 Isuzu Minx would be higher. At 1,816 cc (4 cylinders), 1963 Isuzu Bellett is equipped with a bigger engine. In terms of performance, 1963 Isuzu Bellett (115 HP @ 5800 RPM) has 70 more horse power than 1957 Isuzu Minx. (45 HP @ 4600 RPM). In normal driving conditions, 1963 Isuzu Bellett should accelerate faster than 1957 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 1957 Isuzu Minx weights approximately 20 kg more than 1963 Isuzu Bellett.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Isuzu Bellett (152 Nm @ 4200 RPM) has 61 more torque (in Nm) than 1957 Isuzu Minx. (91 Nm @ 2400 RPM). This means 1963 Isuzu Bellett will have an easier job in driving up hills or pulling heavy equipment than 1957 Isuzu Minx.
Compare all specifications:
| 1963 Isuzu Bellett | 1957 Isuzu Minx | |
| Make | Isuzu | Isuzu |
| Model | Bellett | Minx |
| Year Released | 1963 | 1957 |
| Engine Position | Front | Front |
| Engine Size | 1816 cc | 1390 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 115 HP | 45 HP |
| Engine RPM | 5800 RPM | 4600 RPM |
| Torque | 152 Nm | 91 Nm |
| Torque RPM | 4200 RPM | 2400 RPM |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 930 kg | 950 kg |
| Vehicle Length | 4020 mm | 4080 mm |
| Vehicle Width | 1500 mm | 1560 mm |
| Vehicle Height | 1390 mm | 1520 mm |
| Wheelbase Size | 2360 mm | 2440 mm |
