1963 Lancia Appia vs. 1965 Mercedes-Benz 600
To start off, 1965 Mercedes-Benz 600 is newer by 2 year(s). Which means there will be less support and parts availability for 1963 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Appia would be higher. At 6,330 cc (8 cylinders), 1965 Mercedes-Benz 600 is equipped with a bigger engine. In terms of performance, 1965 Mercedes-Benz 600 (247 HP) has 200 more horse power than 1963 Lancia Appia. (47 HP) In normal driving conditions, 1965 Mercedes-Benz 600 should accelerate faster than 1963 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 1965 Mercedes-Benz 600 weights approximately 1550 kg more than 1963 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Mercedes-Benz 600 (500 Nm @ 2800 RPM) has 423 more torque (in Nm) than 1963 Lancia Appia. (77 Nm @ 3000 RPM). This means 1965 Mercedes-Benz 600 will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Appia. 1965 Mercedes-Benz 600 has automatic transmission and 1963 Lancia Appia has manual transmission. 1963 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1965 Mercedes-Benz 600 will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Lancia Appia | 1965 Mercedes-Benz 600 | |
Make | Lancia | Mercedes-Benz |
Model | Appia | 600 |
Year Released | 1963 | 1965 |
Engine Position | Front | Front |
Engine Size | 1090 cc | 6330 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 47 HP | 247 HP |
Torque | 77 Nm | 500 Nm |
Torque RPM | 3000 RPM | 2800 RPM |
Engine Compression Ratio | 9.0:1 | 9.0:1 |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 900 kg | 2450 kg |
Vehicle Length | 4020 mm | 5330 mm |
Vehicle Width | 1490 mm | 1960 mm |
Vehicle Height | 1410 mm | 1490 mm |
Wheelbase Size | 2520 mm | 2990 mm |
Fuel Tank Capacity | 48 L | 112 L |