1963 Lancia Appia vs. 1999 Mercedes-Benz CLK
To start off, 1999 Mercedes-Benz CLK is newer by 36 year(s). Which means there will be less support and parts availability for 1963 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Appia would be higher. At 3,201 cc (6 cylinders), 1999 Mercedes-Benz CLK is equipped with a bigger engine. In terms of performance, 1999 Mercedes-Benz CLK (220 HP) has 173 more horse power than 1963 Lancia Appia. (47 HP) In normal driving conditions, 1999 Mercedes-Benz CLK should accelerate faster than 1963 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 1999 Mercedes-Benz CLK weights approximately 590 kg more than 1963 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Mercedes-Benz CLK (312 Nm) has 235 more torque (in Nm) than 1963 Lancia Appia. (77 Nm). This means 1999 Mercedes-Benz CLK will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Appia. 1999 Mercedes-Benz CLK has automatic transmission and 1963 Lancia Appia has manual transmission. 1963 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Mercedes-Benz CLK will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Lancia Appia | 1999 Mercedes-Benz CLK | |
Make | Lancia | Mercedes-Benz |
Model | Appia | CLK |
Year Released | 1963 | 1999 |
Engine Position | Front | Front |
Engine Size | 1090 cc | 3201 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 47 HP | 220 HP |
Torque | 77 Nm | 312 Nm |
Engine Compression Ratio | 9.0:1 | 10.0:1 |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 900 kg | 1490 kg |
Vehicle Length | 4020 mm | 4580 mm |
Vehicle Width | 1490 mm | 1730 mm |
Vehicle Height | 1410 mm | 1350 mm |
Wheelbase Size | 2520 mm | 2830 mm |