1963 Lancia Appia vs. 2009 Mercedes-Benz CLK

To start off, 2009 Mercedes-Benz CLK is newer by 46 year(s). Which means there will be less support and parts availability for 1963 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Appia would be higher. At 5,460 cc (8 cylinders), 2009 Mercedes-Benz CLK is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz CLK (382 HP @ 6000 RPM) has 330 more horse power than 1963 Lancia Appia. (52 HP @ 4900 RPM) In normal driving conditions, 2009 Mercedes-Benz CLK should accelerate faster than 1963 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz CLK weights approximately 1880 kg more than 1963 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz CLK (530 Nm @ 2800 RPM) has 443 more torque (in Nm) than 1963 Lancia Appia. (87 Nm @ 3500 RPM). This means 2009 Mercedes-Benz CLK will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Appia. 2009 Mercedes-Benz CLK has automatic transmission and 1963 Lancia Appia has manual transmission. 1963 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz CLK will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Lancia Appia 2009 Mercedes-Benz CLK
Make Lancia Mercedes-Benz
Model Appia CLK
Year Released 1963 2009
Engine Position Front Front
Engine Size 1090 cc 5460 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 52 HP 382 HP
Engine RPM 4900 RPM 6000 RPM
Torque 87 Nm 530 Nm
Torque RPM 3500 RPM 2800 RPM
Engine Compression Ratio 9.0:1 10.7:1
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 950 kg 2830 kg
Vehicle Length 4160 mm 4660 mm
Vehicle Width 1520 mm 1750 mm
Vehicle Height 1330 mm 1450 mm
Wheelbase Size 2520 mm 2720 mm
Fuel Consumption Overall 10.3 L/100km 13.8 L/100km
Fuel Tank Capacity 42 L 62 L