1963 Lancia Flaminia vs. 2008 Peugeot 307
To start off, 2008 Peugeot 307 is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Flaminia would be higher. At 2,458 cc (6 cylinders), 1963 Lancia Flaminia is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1963 Lancia Flaminia weights approximately 54 kg more than 2008 Peugeot 307.
Because 1963 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 307, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Lancia Flaminia (203 Nm @ 3600 RPM) has 56 more torque (in Nm) than 2008 Peugeot 307. (147 Nm @ 4000 RPM). This means 1963 Lancia Flaminia will have an easier job in driving up hills or pulling heavy equipment than 2008 Peugeot 307.
Compare all specifications:
1963 Lancia Flaminia | 2008 Peugeot 307 | |
Make | Lancia | Peugeot |
Model | Flaminia | 307 |
Year Released | 1963 | 2008 |
Engine Position | Front | Front |
Engine Size | 2458 cc | 1587 cc |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 139 HP | 0 HP |
Torque | 203 Nm | 147 Nm |
Torque RPM | 3600 RPM | 4000 RPM |
Engine Compression Ratio | 9.0:1 | 11.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1305 kg | 1251 kg |
Vehicle Length | 4510 mm | 3740 mm |
Vehicle Height | 1290 mm | 1630 mm |
Wheelbase Size | 2530 mm | 2610 mm |
Fuel Tank Capacity | 42 L | 60 L |