1963 Lancia Flaminia vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 50 year(s). Which means there will be less support and parts availability for 1963 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Flaminia would be higher. At 3,600 cc (6 cylinders), 2013 Chrysler 200 CONVERTIBLE is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (279 HP @ 6400 RPM) has 131 more horse power than 1963 Lancia Flaminia. (148 HP @ 5400 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1963 Lancia Flaminia. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 142 kg more than 1963 Lancia Flaminia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 129 more torque (in Nm) than 1963 Lancia Flaminia. (224 Nm @ 3500 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Flaminia. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1963 Lancia Flaminia has manual transmission. 1963 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Lancia Flaminia | 2013 Chrysler 200 CONVERTIBLE | |
Make | Lancia | Chrysler |
Model | Flaminia | 200 CONVERTIBLE |
Year Released | 1963 | 2013 |
Engine Position | Front | Front |
Engine Size | 2775 cc | 3600 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 279 HP |
Engine RPM | 5400 RPM | 6400 RPM |
Torque | 224 Nm | 353 Nm |
Torque RPM | 3500 RPM | 4400 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1480 kg | 1622 kg |
Vehicle Length | 4690 mm | 4870 mm |
Vehicle Width | 1750 mm | 2121 mm |
Vehicle Height | 1430 mm | 1482 mm |
Wheelbase Size | 2760 mm | 2765 mm |
Fuel Tank Capacity | 58 L | 64 L |