1963 Lancia Flavia vs. 2000 Mercedes-Benz A

To start off, 2000 Mercedes-Benz A is newer by 37 year(s). Which means there will be less support and parts availability for 1963 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Flavia would be higher. At 1,598 cc (4 cylinders), 2000 Mercedes-Benz A is equipped with a bigger engine. In terms of performance, 2000 Mercedes-Benz A (90 HP @ 5000 RPM) has 14 more horse power than 1963 Lancia Flavia. (76 HP @ 5800 RPM) In normal driving conditions, 2000 Mercedes-Benz A should accelerate faster than 1963 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 1963 Lancia Flavia weights approximately 95 kg more than 2000 Mercedes-Benz A.

Because 1963 Lancia Flavia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Lancia Flavia. However, in wet, icy, snow, or gravel driving conditions, 2000 Mercedes-Benz A, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Mercedes-Benz A (140 Nm @ 2500 RPM) has 25 more torque (in Nm) than 1963 Lancia Flavia. (115 Nm @ 4500 RPM). This means 2000 Mercedes-Benz A will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Flavia. 2000 Mercedes-Benz A has automatic transmission and 1963 Lancia Flavia has manual transmission. 1963 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Mercedes-Benz A will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Lancia Flavia 2000 Mercedes-Benz A
Make Lancia Mercedes-Benz
Model Flavia A
Year Released 1963 2000
Engine Position Front Front
Engine Size 1488 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type boxer in-line
Horse Power 76 HP 90 HP
Engine RPM 5800 RPM 5000 RPM
Torque 115 Nm 140 Nm
Torque RPM 4500 RPM 2500 RPM
Engine Bore Size 82.1 mm 80 mm
Engine Stroke Size 71 mm 79.5 mm
Engine Compression Ratio 9.0:1 11.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1190 kg 1095 kg
Vehicle Length 4590 mm 3580 mm
Vehicle Width 1620 mm 1730 mm
Vehicle Height 1520 mm 1580 mm
Wheelbase Size 2660 mm 2430 mm
Fuel Tank Capacity 55 L 54 L