1963 Lancia Fulvia vs. 2008 Ford Crown Victoria
To start off, 2008 Ford Crown Victoria is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Fulvia would be higher. At 4,605 cc (8 cylinders), 2008 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2008 Ford Crown Victoria (224 HP @ 4750 RPM) has 137 more horse power than 1963 Lancia Fulvia. (87 HP @ 6000 RPM) In normal driving conditions, 2008 Ford Crown Victoria should accelerate faster than 1963 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Crown Victoria weights approximately 1786 kg more than 1963 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Crown Victoria (359 Nm @ 4000 RPM) has 245 more torque (in Nm) than 1963 Lancia Fulvia. (114 Nm @ 4500 RPM). This means 2008 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia. 2008 Ford Crown Victoria has automatic transmission and 1963 Lancia Fulvia has manual transmission. 1963 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Lancia Fulvia | 2008 Ford Crown Victoria | |
Make | Lancia | Ford |
Model | Fulvia | Crown Victoria |
Year Released | 1963 | 2008 |
Engine Position | Front | Front |
Engine Size | 1298 cc | 4605 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | V | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 87 HP | 224 HP |
Engine RPM | 6000 RPM | 4750 RPM |
Torque | 114 Nm | 359 Nm |
Torque RPM | 4500 RPM | 4000 RPM |
Engine Bore Size | 77 mm | 90.2 mm |
Engine Stroke Size | 69.7 mm | 90 mm |
Engine Compression Ratio | 9.0:1 | 8.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 6 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1070 kg | 2856 kg |
Vehicle Length | 4120 mm | 5390 mm |
Vehicle Width | 1560 mm | 1970 mm |
Vehicle Height | 1400 mm | 1450 mm |
Wheelbase Size | 2510 mm | 2920 mm |
Fuel Tank Capacity | 42 L | 72 L |