1963 Mercedes-Benz 300 vs. 1980 Lancia Beta
To start off, 1980 Lancia Beta is newer by 17 year(s). Which means there will be less support and parts availability for 1963 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1963 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1963 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1963 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 137 more horse power than 1980 Lancia Beta. (101 HP @ 5800 RPM). In normal driving conditions, 1963 Mercedes-Benz 300 should accelerate faster than 1980 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 1963 Mercedes-Benz 300 weights approximately 349 kg more than 1980 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 1980 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Mercedes-Benz 300 (271 Nm @ 4600 RPM) has 137 more torque (in Nm) than 1980 Lancia Beta. (134 Nm @ 3000 RPM). This means 1963 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Beta. 1980 Lancia Beta has automatic transmission and 1963 Mercedes-Benz 300 has manual transmission. 1963 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Lancia Beta will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Mercedes-Benz 300 | 1980 Lancia Beta | |
Make | Mercedes-Benz | Lancia |
Model | 300 | Beta |
Year Released | 1963 | 1980 |
Engine Position | Front | Front |
Engine Size | 2996 cc | 1585 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 238 HP | 101 HP |
Engine RPM | 5800 RPM | 5800 RPM |
Torque | 271 Nm | 134 Nm |
Torque RPM | 4600 RPM | 3000 RPM |
Engine Bore Size | 85.1 mm | 84 mm |
Engine Stroke Size | 88 mm | 71.5 mm |
Engine Compression Ratio | 9.3:1 | 9.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 1385 kg | 1036 kg |
Vehicle Length | 4580 mm | 4290 mm |
Vehicle Width | 1800 mm | 1660 mm |
Vehicle Height | 1310 mm | 1330 mm |
Wheelbase Size | 2410 mm | 2550 mm |
Fuel Tank Capacity | 100 L | 59 L |