1963 Mercedes-Benz 300 vs. 2005 Chevrolet Cavalier
To start off, 2005 Chevrolet Cavalier is newer by 42 year(s). Which means there will be less support and parts availability for 1963 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1963 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1963 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1963 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 118 more horse power than 2005 Chevrolet Cavalier. (120 HP @ 5200 RPM). In normal driving conditions, 1963 Mercedes-Benz 300 should accelerate faster than 2005 Chevrolet Cavalier. With that said, vehicle weight also plays an important factor in acceleration. 1963 Mercedes-Benz 300 weights approximately 167 kg more than 2005 Chevrolet Cavalier. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2005 Chevrolet Cavalier, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Mercedes-Benz 300 (271 Nm @ 4600 RPM) has 95 more torque (in Nm) than 2005 Chevrolet Cavalier. (176 Nm @ 3600 RPM). This means 1963 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2005 Chevrolet Cavalier. 2005 Chevrolet Cavalier has automatic transmission and 1963 Mercedes-Benz 300 has manual transmission. 1963 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chevrolet Cavalier will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Mercedes-Benz 300 | 2005 Chevrolet Cavalier | |
Make | Mercedes-Benz | Chevrolet |
Model | 300 | Cavalier |
Year Released | 1963 | 2005 |
Engine Position | Front | Front |
Engine Size | 2996 cc | 2190 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 238 HP | 120 HP |
Engine RPM | 5800 RPM | 5200 RPM |
Torque | 271 Nm | 176 Nm |
Torque RPM | 4600 RPM | 3600 RPM |
Engine Bore Size | 85.1 mm | 89 mm |
Engine Stroke Size | 88 mm | 88 mm |
Engine Compression Ratio | 9.3:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1385 kg | 1218 kg |
Vehicle Length | 4580 mm | 4600 mm |
Vehicle Width | 1800 mm | 1750 mm |
Vehicle Height | 1310 mm | 1380 mm |
Wheelbase Size | 2410 mm | 2650 mm |
Fuel Tank Capacity | 100 L | 57 L |