1963 Mercedes-Benz 300 vs. 2012 Ford Falcon

To start off, 2012 Ford Falcon is newer by 49 year(s). Which means there will be less support and parts availability for 1963 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1963 Mercedes-Benz 300 would be higher. At 3,983 cc (6 cylinders), 2012 Ford Falcon is equipped with a bigger engine. In terms of performance, 2012 Ford Falcon (261 HP @ 6000 RPM) has 23 more horse power than 1963 Mercedes-Benz 300. (238 HP @ 5800 RPM) In normal driving conditions, 2012 Ford Falcon should accelerate faster than 1963 Mercedes-Benz 300. With that said, vehicle weight also plays an important factor in acceleration. 2012 Ford Falcon weights approximately 319 kg more than 1963 Mercedes-Benz 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Ford Falcon (391 Nm @ 3250 RPM) has 120 more torque (in Nm) than 1963 Mercedes-Benz 300. (271 Nm @ 4600 RPM). This means 2012 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1963 Mercedes-Benz 300. 2012 Ford Falcon has automatic transmission and 1963 Mercedes-Benz 300 has manual transmission. 1963 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Falcon will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Mercedes-Benz 300 2012 Ford Falcon
Make Mercedes-Benz Ford
Model 300 Falcon
Year Released 1963 2012
Engine Position Front Front
Engine Size 2996 cc 3983 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 238 HP 261 HP
Engine RPM 5800 RPM 6000 RPM
Torque 271 Nm 391 Nm
Torque RPM 4600 RPM 3250 RPM
Engine Bore Size 85.1 mm 92.3 mm
Engine Stroke Size 88 mm 99.3 mm
Engine Compression Ratio 9.3:1 10.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual 6-speed automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1385 kg 1704 kg
Vehicle Length 4580 mm 4967 mm
Vehicle Width 1800 mm 1868 mm
Vehicle Height 1310 mm 1433 mm
Wheelbase Size 2410 mm 2838 mm
Fuel Tank Capacity 100 L 68 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]