1963 Moretti 2500 vs. 1988 Pontiac Fiero
To start off, 1988 Pontiac Fiero is newer by 25 year(s). Which means there will be less support and parts availability for 1963 Moretti 2500. In addition, the cost of maintenance, including insurance, on 1963 Moretti 2500 would be higher. At 2,826 cc (6 cylinders), 1988 Pontiac Fiero is equipped with a bigger engine. In terms of performance, both vehicles can yield 143 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1963 Moretti 2500 weights approximately 70 kg more than 1988 Pontiac Fiero.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Pontiac Fiero (220 Nm) has 33 more torque (in Nm) than 1963 Moretti 2500. (187 Nm). This means 1988 Pontiac Fiero will have an easier job in driving up hills or pulling heavy equipment than 1963 Moretti 2500.
Compare all specifications:
1963 Moretti 2500 | 1988 Pontiac Fiero | |
Make | Moretti | Pontiac |
Model | 2500 | Fiero |
Year Released | 1963 | 1988 |
Engine Position | Front | Middle |
Engine Size | 2453 cc | 2826 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 143 HP | 143 HP |
Engine RPM | 5800 RPM | 4500 RPM |
Torque | 187 Nm | 220 Nm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 2 seats |
Vehicle Weight | 1320 kg | 1250 kg |
Vehicle Length | 4490 mm | 4190 mm |
Vehicle Width | 1630 mm | 1760 mm |
Vehicle Height | 1310 mm | 1200 mm |
Wheelbase Size | 2660 mm | 2380 mm |