1963 Porsche 356 vs. 2010 Ford Bantam

To start off, 2010 Ford Bantam is newer by 47 year(s). Which means there will be less support and parts availability for 1963 Porsche 356. In addition, the cost of maintenance, including insurance, on 1963 Porsche 356 would be higher. At 1,597 cc (4 cylinders), 2010 Ford Bantam is equipped with a bigger engine. In terms of performance, 1963 Porsche 356 (95 HP @ 5500 RPM) has 1 more horse power than 2010 Ford Bantam. (94 HP @ 5500 RPM). In normal driving conditions, 1963 Porsche 356 should accelerate faster than 2010 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Bantam weights approximately 50 kg more than 1963 Porsche 356.

Because 1963 Porsche 356 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Porsche 356. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1963 Porsche 356 2010 Ford Bantam
Make Porsche Ford
Model 356 Bantam
Year Released 1963 2010
Engine Position Rear Front
Engine Size 1581 cc 1597 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type boxer in-line
Horse Power 95 HP 94 HP
Engine RPM 5500 RPM 5500 RPM
Engine Bore Size 82.5 mm 82 mm
Engine Stroke Size 74 mm 75.5 mm
Engine Compression Ratio 9.5:1 9.5:1
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 934 kg 984 kg
Vehicle Length 4020 mm 4280 mm
Vehicle Width 1680 mm 1470 mm
Vehicle Height 1320 mm 1640 mm
Wheelbase Size 2110 mm 2670 mm
Fuel Tank Capacity 50 L 54 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]