1963 Steyr 700C vs. 2010 Toyota Sequoia

To start off, 2010 Toyota Sequoia is newer by 47 year(s). Which means there will be less support and parts availability for 1963 Steyr 700C. In addition, the cost of maintenance, including insurance, on 1963 Steyr 700C would be higher. At 5,700 cc (8 cylinders), 2010 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2010 Toyota Sequoia (381 HP @ 5600 RPM) has 361 more horse power than 1963 Steyr 700C. (20 HP @ 4800 RPM) In normal driving conditions, 2010 Toyota Sequoia should accelerate faster than 1963 Steyr 700C. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota Sequoia weights approximately 2059 kg more than 1963 Steyr 700C. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Sequoia (543 Nm @ 3600 RPM) has 502 more torque (in Nm) than 1963 Steyr 700C. (41 Nm @ 2800 RPM). This means 2010 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 1963 Steyr 700C. 2010 Toyota Sequoia has automatic transmission and 1963 Steyr 700C has manual transmission. 1963 Steyr 700C will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Toyota Sequoia will be easier to drive especially in heavy traffic.

Compare all specifications: