1964 Alfa Romeo 2600 vs. 1983 Nissan Stanza
To start off, 1983 Nissan Stanza is newer by 19 year(s). Which means there will be less support and parts availability for 1964 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1964 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1964 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 1964 Alfa Romeo 2600 (163 HP @ 5900 RPM) has 82 more horse power than 1983 Nissan Stanza. (81 HP @ 5200 RPM). In normal driving conditions, 1964 Alfa Romeo 2600 should accelerate faster than 1983 Nissan Stanza. With that said, vehicle weight also plays an important factor in acceleration. 1964 Alfa Romeo 2600 weights approximately 235 kg more than 1983 Nissan Stanza. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1964 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 1983 Nissan Stanza, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1964 Alfa Romeo 2600 (220 Nm @ 4000 RPM) has 90 more torque (in Nm) than 1983 Nissan Stanza. (130 Nm @ 3200 RPM). This means 1964 Alfa Romeo 2600 will have an easier job in driving up hills or pulling heavy equipment than 1983 Nissan Stanza. 1983 Nissan Stanza has automatic transmission and 1964 Alfa Romeo 2600 has manual transmission. 1964 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Nissan Stanza will be easier to drive especially in heavy traffic.
Compare all specifications:
1964 Alfa Romeo 2600 | 1983 Nissan Stanza | |
Make | Alfa Romeo | Nissan |
Model | 2600 | Stanza |
Year Released | 1964 | 1983 |
Engine Position | Front | Front |
Engine Size | 2584 cc | 1598 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 163 HP | 81 HP |
Engine RPM | 5900 RPM | 5200 RPM |
Torque | 220 Nm | 130 Nm |
Torque RPM | 4000 RPM | 3200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1115 kg | 880 kg |
Vehicle Length | 4410 mm | 4310 mm |
Vehicle Width | 1660 mm | 1670 mm |
Vehicle Height | 1330 mm | 1390 mm |
Wheelbase Size | 2510 mm | 2480 mm |