1964 Alfa Romeo 2600 vs. 2010 Cadillac DTS
To start off, 2010 Cadillac DTS is newer by 46 year(s). Which means there will be less support and parts availability for 1964 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1964 Alfa Romeo 2600 would be higher. At 4,600 cc (8 cylinders), 2010 Cadillac DTS is equipped with a bigger engine. In terms of performance, 2010 Cadillac DTS (275 HP @ 6000 RPM) has 112 more horse power than 1964 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2010 Cadillac DTS should accelerate faster than 1964 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2010 Cadillac DTS weights approximately 703 kg more than 1964 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1964 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2010 Cadillac DTS, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Cadillac DTS (400 Nm @ 4400 RPM) has 180 more torque (in Nm) than 1964 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2010 Cadillac DTS will have an easier job in driving up hills or pulling heavy equipment than 1964 Alfa Romeo 2600. 2010 Cadillac DTS has automatic transmission and 1964 Alfa Romeo 2600 has manual transmission. 1964 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Cadillac DTS will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1964 Alfa Romeo 2600 | 2010 Cadillac DTS | |
| Make | Alfa Romeo | Cadillac |
| Model | 2600 | DTS |
| Year Released | 1964 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2584 cc | 4600 cc |
| Engine Cylinders | 6 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 163 HP | 275 HP |
| Engine RPM | 5900 RPM | 6000 RPM |
| Torque | 220 Nm | 400 Nm |
| Torque RPM | 4000 RPM | 4400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1115 kg | 1818 kg |
| Vehicle Length | 4410 mm | 5273 mm |
| Vehicle Width | 1660 mm | 1900 mm |
| Vehicle Height | 1330 mm | 1463 mm |
| Wheelbase Size | 2510 mm | 2936 mm |
| Fuel Tank Capacity | 47 L | 68 L |
