1964 Austin A 110 vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 49 year(s). Which means there will be less support and parts availability for 1964 Austin A 110. In addition, the cost of maintenance, including insurance, on 1964 Austin A 110 would be higher. At 2,912 cc (6 cylinders), 1964 Austin A 110 is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (171 HP @ 6400 RPM) has 51 more horse power than 1964 Austin A 110. (120 HP @ 4750 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1964 Austin A 110. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 210 kg more than 1964 Austin A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1964 Austin A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Austin A 110. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 131 more torque (in Nm) than 1964 Austin A 110. (222 Nm @ 2750 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1964 Austin A 110. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1964 Austin A 110 has manual transmission. 1964 Austin A 110 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
1964 Austin A 110 | 2013 Chrysler 200 CONVERTIBLE | |
Make | Austin | Chrysler |
Model | A 110 | 200 CONVERTIBLE |
Year Released | 1964 | 2013 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 2400 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 120 HP | 171 HP |
Engine RPM | 4750 RPM | 6400 RPM |
Torque | 222 Nm | 353 Nm |
Torque RPM | 2750 RPM | 4400 RPM |
Engine Bore Size | 83.4 mm | 96 mm |
Engine Stroke Size | 88.9 mm | 83 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1604 kg | 1814 kg |
Vehicle Length | 4950 mm | 4947 mm |
Vehicle Width | 1750 mm | 2089 mm |
Vehicle Height | 1540 mm | 1470 mm |
Wheelbase Size | 2800 mm | 2765 mm |
Fuel Tank Capacity | 72 L | 64 L |