1964 Austin A 90 vs. 2011 Fiat Panda

To start off, 2011 Fiat Panda is newer by 47 year(s). Which means there will be less support and parts availability for 1964 Austin A 90. In addition, the cost of maintenance, including insurance, on 1964 Austin A 90 would be higher. At 2,912 cc (6 cylinders), 1964 Austin A 90 is equipped with a bigger engine. In terms of performance, 1964 Austin A 90 (120 HP @ 4750 RPM) has 61 more horse power than 2011 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1964 Austin A 90 should accelerate faster than 2011 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1964 Austin A 90 weights approximately 447 kg more than 2011 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1964 Austin A 90 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Austin A 90. However, in wet, icy, snow, or gravel driving conditions, 2011 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1964 Austin A 90 (221 Nm @ 2750 RPM) has 119 more torque (in Nm) than 2011 Fiat Panda. (102 Nm @ 2500 RPM). This means 1964 Austin A 90 will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat Panda. 2011 Fiat Panda has automatic transmission and 1964 Austin A 90 has manual transmission. 1964 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Fiat Panda will be easier to drive especially in heavy traffic.

Compare all specifications:

1964 Austin A 90 2011 Fiat Panda
Make Austin Fiat
Model A 90 Panda
Year Released 1964 2011
Engine Position Front Front
Engine Size 2912 cc 1242 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 120 HP 59 HP
Engine RPM 4750 RPM 5000 RPM
Torque 221 Nm 102 Nm
Torque RPM 2750 RPM 2500 RPM
Engine Bore Size 83.4 mm 70.8 mm
Engine Stroke Size 88.9 mm 78.9 mm
Engine Compression Ratio 8.3:1 9.8:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1572 kg 1125 kg
Vehicle Length 4780 mm 3540 mm
Vehicle Width 1750 mm 1600 mm
Vehicle Height 1540 mm 1620 mm
Wheelbase Size 2750 mm 2310 mm
Fuel Tank Capacity 34 L 30 L