1964 Beijing BJ 212 vs. 1982 BMW 325
To start off, 1982 BMW 325 is newer by 18 year(s). Which means there will be less support and parts availability for 1964 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1964 Beijing BJ 212 would be higher. At 2,693 cc (6 cylinders), 1982 BMW 325 is equipped with a bigger engine. In terms of performance, 1982 BMW 325 (120 HP @ 4250 RPM) has 46 more horse power than 1964 Beijing BJ 212. (74 HP @ 3500 RPM) In normal driving conditions, 1982 BMW 325 should accelerate faster than 1964 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1964 Beijing BJ 212 weights approximately 255 kg more than 1982 BMW 325.
Because 1964 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1982 BMW 325. In wet, icy, snow, or gravel driving conditions, 1964 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1982 BMW 325 (230 Nm @ 3250 RPM) has 58 more torque (in Nm) than 1964 Beijing BJ 212. (172 Nm @ 2000 RPM). This means 1982 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1964 Beijing BJ 212.
Compare all specifications:
| 1964 Beijing BJ 212 | 1982 BMW 325 | |
| Make | Beijing | BMW |
| Model | BJ 212 | 325 |
| Year Released | 1964 | 1982 |
| Engine Size | 2445 cc | 2693 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 74 HP | 120 HP |
| Engine RPM | 3500 RPM | 4250 RPM |
| Torque | 172 Nm | 230 Nm |
| Torque RPM | 2000 RPM | 3250 RPM |
| Drive Type | 4WD | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1395 kg | 1140 kg |
| Vehicle Length | 3910 mm | 4330 mm |
| Vehicle Width | 1760 mm | 1650 mm |
| Vehicle Height | 1880 mm | 1390 mm |
| Wheelbase Size | 2310 mm | 2580 mm |
