1964 Beijing BJ 212 vs. 1992 Beijing BJ 212

To start off, 1992 Beijing BJ 212 is newer by 28 year(s). Which means there will be less support and parts availability for 1964 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1964 Beijing BJ 212 would be higher. At 2,445 cc (4 cylinders), 1964 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 1992 Beijing BJ 212 (87 HP @ 4250 RPM) has 13 more horse power than 1964 Beijing BJ 212. (74 HP @ 3500 RPM) In normal driving conditions, 1992 Beijing BJ 212 should accelerate faster than 1964 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1992 Beijing BJ 212 weights approximately 135 kg more than 1964 Beijing BJ 212. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Beijing BJ 212 (181 Nm @ 2000 RPM) has 9 more torque (in Nm) than 1964 Beijing BJ 212. (172 Nm @ 2000 RPM). This means 1992 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1964 Beijing BJ 212.

Compare all specifications:

1964 Beijing BJ 212 1992 Beijing BJ 212
Make Beijing Beijing
Model BJ 212 BJ 212
Year Released 1964 1992
Engine Size 2445 cc 2068 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 74 HP 87 HP
Engine RPM 3500 RPM 4250 RPM
Torque 172 Nm 181 Nm
Torque RPM 2000 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1395 kg 1530 kg
Vehicle Length 3910 mm 3910 mm
Vehicle Width 1760 mm 1760 mm
Vehicle Height 1880 mm 1880 mm
Wheelbase Size 2310 mm 2310 mm