1964 Beijing BJ 212 vs. 2008 BMW 525

To start off, 2008 BMW 525 is newer by 44 year(s). Which means there will be less support and parts availability for 1964 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1964 Beijing BJ 212 would be higher. At 2,497 cc (6 cylinders), 2008 BMW 525 is equipped with a bigger engine. In terms of performance, 2008 BMW 525 (215 HP @ 6500 RPM) has 141 more horse power than 1964 Beijing BJ 212. (74 HP @ 3500 RPM) In normal driving conditions, 2008 BMW 525 should accelerate faster than 1964 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 525 weights approximately 80 kg more than 1964 Beijing BJ 212. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1964 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2008 BMW 525. In wet, icy, snow, or gravel driving conditions, 1964 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 525 (250 Nm @ 2900 RPM) has 78 more torque (in Nm) than 1964 Beijing BJ 212. (172 Nm @ 2000 RPM). This means 2008 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1964 Beijing BJ 212.

Compare all specifications:

1964 Beijing BJ 212 2008 BMW 525
Make Beijing BMW
Model BJ 212 525
Year Released 1964 2008
Engine Size 2445 cc 2497 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 74 HP 215 HP
Engine RPM 3500 RPM 6500 RPM
Torque 172 Nm 250 Nm
Torque RPM 2000 RPM 2900 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1395 kg 1475 kg
Vehicle Length 3910 mm 5050 mm
Vehicle Height 1880 mm 1470 mm
Wheelbase Size 2310 mm 2890 mm