1964 Fiat 500 vs. 2005 Mazda 3

To start off, 2005 Mazda 3 is newer by 41 year(s). Which means there will be less support and parts availability for 1964 Fiat 500. In addition, the cost of maintenance, including insurance, on 1964 Fiat 500 would be higher. At 1,594 cc (4 cylinders), 2005 Mazda 3 is equipped with a bigger engine. In terms of performance, 2005 Mazda 3 (104 HP @ 5500 RPM) has 82 more horse power than 1964 Fiat 500. (22 HP @ 4400 RPM) In normal driving conditions, 2005 Mazda 3 should accelerate faster than 1964 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2005 Mazda 3 weights approximately 539 kg more than 1964 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1964 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2005 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Mazda 3 (145 Nm @ 4000 RPM) has 109 more torque (in Nm) than 1964 Fiat 500. (36 Nm @ 2800 RPM). This means 2005 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1964 Fiat 500. 2005 Mazda 3 has automatic transmission and 1964 Fiat 500 has manual transmission. 1964 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1964 Fiat 500 2005 Mazda 3
Make Fiat Mazda
Model 500 3
Year Released 1964 2005
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 499 cc 1594 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 22 HP 104 HP
Engine RPM 4400 RPM 5500 RPM
Torque 36 Nm 145 Nm
Torque RPM 2800 RPM 4000 RPM
Engine Compression Ratio 8.3:1 10.0:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 546 kg 1085 kg
Vehicle Length 3190 mm 4500 mm
Vehicle Width 1330 mm 1760 mm
Vehicle Height 1360 mm 1470 mm
Wheelbase Size 1950 mm 2650 mm
Fuel Tank Capacity 38 L 55 L