1964 Honda S600 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 44 year(s). Which means there will be less support and parts availability for 1964 Honda S600. In addition, the cost of maintenance, including insurance, on 1964 Honda S600 would be higher. At 1,560 cc (4 cylinders), 2008 Mazda 3 is equipped with a bigger engine. In terms of performance, 2008 Mazda 3 (108 HP @ 4000 RPM) has 54 more horse power than 1964 Honda S600. (54 HP @ 8500 RPM) In normal driving conditions, 2008 Mazda 3 should accelerate faster than 1964 Honda S600. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 536 kg more than 1964 Honda S600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1964 Honda S600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Honda S600. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1964 Honda S600 2008 Mazda 3
Make Honda Mazda
Model S600 3
Year Released 1964 2008
Engine Position Front Front
Engine Size 606 cc 1560 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 54 HP 108 HP
Engine RPM 8500 RPM 4000 RPM
Engine Bore Size 54.5 mm 75 mm
Engine Stroke Size 65 mm 88.3 mm
Engine Compression Ratio 9.5:1 18.3:1
Top Speed 142 km/hour 185 km/hour
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 730 kg 1266 kg
Vehicle Length 3340 mm 4430 mm
Vehicle Width 1410 mm 1760 mm
Vehicle Height 1230 mm 1470 mm
Wheelbase Size 2010 mm 2650 mm
Fuel Tank Capacity 25 L 55 L