1964 Innocenti IM 3 vs. 1952 MG TD

To start off, 1964 Innocenti IM 3 is newer by 12 year(s). Which means there will be less support and parts availability for 1952 MG TD. In addition, the cost of maintenance, including insurance, on 1952 MG TD would be higher. At 1,250 cc (4 cylinders), 1952 MG TD is equipped with a bigger engine. In terms of performance, 1952 MG TD (59 HP @ 5500 RPM) has 3 more horse power than 1964 Innocenti IM 3. (56 HP @ 5500 RPM) In normal driving conditions, 1952 MG TD should accelerate faster than 1964 Innocenti IM 3. With that said, vehicle weight also plays an important factor in acceleration. 1964 Innocenti IM 3 weights approximately 15 kg more than 1952 MG TD.

Because 1952 MG TD is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 MG TD. However, in wet, icy, snow, or gravel driving conditions, 1964 Innocenti IM 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 MG TD (87 Nm @ 2600 RPM) has 4 more torque (in Nm) than 1964 Innocenti IM 3. (83 Nm @ 2500 RPM). This means 1952 MG TD will have an easier job in driving up hills or pulling heavy equipment than 1964 Innocenti IM 3.

Compare all specifications:

1964 Innocenti IM 3 1952 MG TD
Make Innocenti MG
Model IM 3 TD
Year Released 1964 1952
Engine Position Front Front
Engine Size 1096 cc 1250 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 56 HP 59 HP
Engine RPM 5500 RPM 5500 RPM
Torque 83 Nm 87 Nm
Torque RPM 2500 RPM 2600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Vehicle Weight 890 kg 875 kg
Vehicle Length 3760 mm 3690 mm
Vehicle Width 1570 mm 1490 mm
Vehicle Height 1380 mm 1350 mm
Wheelbase Size 2380 mm 2390 mm