1964 Jensen CV-8 vs. 2010 Alfa Romeo 147

To start off, 2010 Alfa Romeo 147 is newer by 46 year(s). Which means there will be less support and parts availability for 1964 Jensen CV-8. In addition, the cost of maintenance, including insurance, on 1964 Jensen CV-8 would be higher. At 6,286 cc (8 cylinders), 1964 Jensen CV-8 is equipped with a bigger engine. In terms of performance, 1964 Jensen CV-8 (330 HP @ 4600 RPM) has 212 more horse power than 2010 Alfa Romeo 147. (118 HP @ 6200 RPM). In normal driving conditions, 1964 Jensen CV-8 should accelerate faster than 2010 Alfa Romeo 147. With that said, vehicle weight also plays an important factor in acceleration. 1964 Jensen CV-8 weights approximately 319 kg more than 2010 Alfa Romeo 147. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1964 Jensen CV-8 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Jensen CV-8. However, in wet, icy, snow, or gravel driving conditions, 2010 Alfa Romeo 147, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1964 Jensen CV-8 (576 Nm @ 2800 RPM) has 430 more torque (in Nm) than 2010 Alfa Romeo 147. (146 Nm @ 4200 RPM). This means 1964 Jensen CV-8 will have an easier job in driving up hills or pulling heavy equipment than 2010 Alfa Romeo 147. 1964 Jensen CV-8 has automatic transmission and 2010 Alfa Romeo 147 has manual transmission. 2010 Alfa Romeo 147 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1964 Jensen CV-8 will be easier to drive especially in heavy traffic.

Compare all specifications:

1964 Jensen CV-8 2010 Alfa Romeo 147
Make Jensen Alfa Romeo
Model CV-8 147
Year Released 1964 2010
Engine Position Front Front
Engine Size 6286 cc 1598 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 330 HP 118 HP
Engine RPM 4600 RPM 6200 RPM
Torque 576 Nm 146 Nm
Torque RPM 2800 RPM 4200 RPM
Engine Bore Size 108.1 mm 82 mm
Engine Stroke Size 86 mm 75.7 mm
Engine Compression Ratio 10.0:1 10.3:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1594 kg 1275 kg
Vehicle Length 4690 mm 4230 mm
Vehicle Width 1720 mm 1740 mm
Vehicle Height 1400 mm 1450 mm
Wheelbase Size 2670 mm 2550 mm
Fuel Tank Capacity 72 L 60 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]