1964 Mercedes-Benz 600 vs. 2010 Fiat Siena
To start off, 2010 Fiat Siena is newer by 46 year(s). Which means there will be less support and parts availability for 1964 Mercedes-Benz 600. In addition, the cost of maintenance, including insurance, on 1964 Mercedes-Benz 600 would be higher. At 6,332 cc (8 cylinders), 1964 Mercedes-Benz 600 is equipped with a bigger engine. In terms of performance, 1964 Mercedes-Benz 600 (247 HP @ 4000 RPM) has 147 more horse power than 2010 Fiat Siena. (100 HP @ 5500 RPM). In normal driving conditions, 1964 Mercedes-Benz 600 should accelerate faster than 2010 Fiat Siena. With that said, vehicle weight also plays an important factor in acceleration. 1964 Mercedes-Benz 600 weights approximately 1401 kg more than 2010 Fiat Siena. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1964 Mercedes-Benz 600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Mercedes-Benz 600. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1964 Mercedes-Benz 600 (500 Nm @ 2800 RPM) has 426 more torque (in Nm) than 2010 Fiat Siena. (74 Nm @ 5500 RPM). This means 1964 Mercedes-Benz 600 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Siena. 1964 Mercedes-Benz 600 has automatic transmission and 2010 Fiat Siena has manual transmission. 2010 Fiat Siena will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1964 Mercedes-Benz 600 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1964 Mercedes-Benz 600 | 2010 Fiat Siena | |
| Make | Mercedes-Benz | Fiat |
| Model | 600 | Siena |
| Year Released | 1964 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 6332 cc | 1581 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 247 HP | 100 HP |
| Engine RPM | 4000 RPM | 5500 RPM |
| Torque | 500 Nm | 74 Nm |
| Torque RPM | 2800 RPM | 5500 RPM |
| Engine Bore Size | 103 mm | 86.4 mm |
| Engine Stroke Size | 95 mm | 67.4 mm |
| Engine Compression Ratio | 9.0:1 | 9.5:1 |
| Top Speed | 204 km/hour | 184 km/hour |
| Acceleration 0-100mph | 9.7 seconds | 11.5 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 2475 kg | 1074 kg |
| Vehicle Length | 5550 mm | 3550 mm |
| Vehicle Width | 1960 mm | 1640 mm |
| Vehicle Height | 1490 mm | 1440 mm |
| Wheelbase Size | 3210 mm | 2380 mm |
| Fuel Tank Capacity | 111 L | 54 L |
