1965 Abarth 750 vs. 2008 Peugeot 307

To start off, 2008 Peugeot 307 is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Abarth 750. In addition, the cost of maintenance, including insurance, on 1965 Abarth 750 would be higher. At 1,598 cc (4 cylinders), 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 933 kg more than 1965 Abarth 750.

Because 1965 Abarth 750 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Abarth 750. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 307, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 307 (147 Nm @ 4000 RPM) has 89 more torque (in Nm) than 1965 Abarth 750. (58 Nm @ 4500 RPM). This means 2008 Peugeot 307 will have an easier job in driving up hills or pulling heavy equipment than 1965 Abarth 750.

Compare all specifications:

1965 Abarth 750 2008 Peugeot 307
Make Abarth Peugeot
Model 750 307
Year Released 1965 2008
Engine Position Rear Front
Engine Size 747 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 43 HP 0 HP
Torque 58 Nm 147 Nm
Torque RPM 4500 RPM 4000 RPM
Engine Bore Size 61 mm 78.5 mm
Engine Stroke Size 64 mm 82 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 535 kg 1468 kg
Vehicle Length 3300 mm 4210 mm
Vehicle Width 1390 mm 1740 mm
Vehicle Height 1410 mm 1520 mm
Wheelbase Size 2010 mm 2610 mm
Fuel Tank Capacity 27 L 50 L