1965 Abarth Mono 1000 vs. 1971 Mazda 818

To start off, 1971 Mazda 818 is newer by 6 year(s). Which means there will be less support and parts availability for 1965 Abarth Mono 1000. In addition, the cost of maintenance, including insurance, on 1965 Abarth Mono 1000 would be higher. At 1,272 cc (4 cylinders), 1971 Mazda 818 is equipped with a bigger engine. In terms of performance, 1971 Mazda 818 (80 HP @ 5500 RPM) has 21 more horse power than 1965 Abarth Mono 1000. (59 HP @ 6600 RPM) In normal driving conditions, 1971 Mazda 818 should accelerate faster than 1965 Abarth Mono 1000. With that said, vehicle weight also plays an important factor in acceleration. 1971 Mazda 818 weights approximately 250 kg more than 1965 Abarth Mono 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Mazda 818 (124 Nm @ 3500 RPM) has 34 more torque (in Nm) than 1965 Abarth Mono 1000. (90 Nm @ 3200 RPM). This means 1971 Mazda 818 will have an easier job in driving up hills or pulling heavy equipment than 1965 Abarth Mono 1000.

Compare all specifications:

1965 Abarth Mono 1000 1971 Mazda 818
Make Abarth Mazda
Model Mono 1000 818
Year Released 1965 1971
Engine Position Rear Front
Engine Size 982 cc 1272 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 59 HP 80 HP
Engine RPM 6600 RPM 5500 RPM
Torque 90 Nm 124 Nm
Torque RPM 3200 RPM 3500 RPM
Engine Compression Ratio 9.8:1 9.2:1
Drive Type Rear Rear
Number of Seats 2 seats 5 seats
Vehicle Weight 560 kg 810 kg
Vehicle Length 3490 mm 3970 mm
Vehicle Width 1420 mm 1610 mm
Vehicle Height 1180 mm 1380 mm
Wheelbase Size 2010 mm 2290 mm