1965 Abarth Mono 1000 vs. 2008 Toyota Stallion
To start off, 2008 Toyota Stallion is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Abarth Mono 1000. In addition, the cost of maintenance, including insurance, on 1965 Abarth Mono 1000 would be higher. At 1,812 cc, 2008 Toyota Stallion is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Stallion weights approximately 758 kg more than 1965 Abarth Mono 1000.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Toyota Stallion (135 Nm @ 2400 RPM) has 45 more torque (in Nm) than 1965 Abarth Mono 1000. (90 Nm @ 3200 RPM). This means 2008 Toyota Stallion will have an easier job in driving up hills or pulling heavy equipment than 1965 Abarth Mono 1000.
Compare all specifications:
1965 Abarth Mono 1000 | 2008 Toyota Stallion | |
Make | Abarth | Toyota |
Model | Mono 1000 | Stallion |
Year Released | 1965 | 2008 |
Engine Position | Rear | Front |
Engine Size | 982 cc | 1812 cc |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 59 HP | 0 HP |
Torque | 90 Nm | 135 Nm |
Torque RPM | 3200 RPM | 2400 RPM |
Engine Compression Ratio | 9.8:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 2 seats | 3 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 560 kg | 1318 kg |
Vehicle Length | 3490 mm | 4790 mm |
Vehicle Height | 1180 mm | 1770 mm |
Wheelbase Size | 2010 mm | 2660 mm |
Fuel Tank Capacity | 59 L | 70 L |