1965 Alfa Romeo 2600 vs. 1976 Chevrolet Blazer

To start off, 1976 Chevrolet Blazer is newer by 11 year(s). Which means there will be less support and parts availability for 1965 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1965 Alfa Romeo 2600 would be higher. At 4,092 cc (6 cylinders), 1976 Chevrolet Blazer is equipped with a bigger engine. In terms of performance, 1965 Alfa Romeo 2600 (163 HP @ 5900 RPM) has 63 more horse power than 1976 Chevrolet Blazer. (100 HP @ 3600 RPM). In normal driving conditions, 1965 Alfa Romeo 2600 should accelerate faster than 1976 Chevrolet Blazer. With that said, vehicle weight also plays an important factor in acceleration. 1976 Chevrolet Blazer weights approximately 426 kg more than 1965 Alfa Romeo 2600.

Because 1976 Chevrolet Blazer is four wheel drive (4WD), it will have significant more traction and grip than 1965 Alfa Romeo 2600. In wet, icy, snow, or gravel driving conditions, 1976 Chevrolet Blazer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Chevrolet Blazer (242 Nm @ 1600 RPM) has 22 more torque (in Nm) than 1965 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 1976 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 1965 Alfa Romeo 2600.

Compare all specifications:

1965 Alfa Romeo 2600 1976 Chevrolet Blazer
Make Alfa Romeo Chevrolet
Model 2600 Blazer
Year Released 1965 1976
Engine Position Front Front
Engine Size 2584 cc 4092 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 163 HP 100 HP
Engine RPM 5900 RPM 3600 RPM
Torque 220 Nm 242 Nm
Torque RPM 4000 RPM 1600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Number of Seats 4 seats 4 seats
Vehicle Weight 1374 kg 1800 kg
Vehicle Length 4590 mm 4670 mm
Vehicle Width 1710 mm 2050 mm
Vehicle Height 1390 mm 1870 mm
Wheelbase Size 2510 mm 2710 mm