1965 Alfa Romeo 2600 vs. 2001 Toyota RunX
To start off, 2001 Toyota RunX is newer by 36 year(s). Which means there will be less support and parts availability for 1965 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1965 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1965 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 1965 Alfa Romeo 2600 (130 HP @ 5900 RPM) has 26 more horse power than 2001 Toyota RunX. (104 HP @ 6200 RPM). In normal driving conditions, 1965 Alfa Romeo 2600 should accelerate faster than 2001 Toyota RunX. With that said, vehicle weight also plays an important factor in acceleration. 1965 Alfa Romeo 2600 weights approximately 320 kg more than 2001 Toyota RunX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2001 Toyota RunX, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Alfa Romeo 2600 (188 Nm @ 4000 RPM) has 47 more torque (in Nm) than 2001 Toyota RunX. (141 Nm @ 4200 RPM). This means 1965 Alfa Romeo 2600 will have an easier job in driving up hills or pulling heavy equipment than 2001 Toyota RunX. 2001 Toyota RunX has automatic transmission and 1965 Alfa Romeo 2600 has manual transmission. 1965 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2001 Toyota RunX will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1965 Alfa Romeo 2600 | 2001 Toyota RunX | |
| Make | Alfa Romeo | Toyota |
| Model | 2600 | RunX |
| Year Released | 1965 | 2001 |
| Engine Position | Front | Front |
| Engine Size | 2584 cc | 1497 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 130 HP | 104 HP |
| Engine RPM | 5900 RPM | 6200 RPM |
| Torque | 188 Nm | 141 Nm |
| Torque RPM | 4000 RPM | 4200 RPM |
| Engine Bore Size | 83 mm | 75.1 mm |
| Engine Stroke Size | 79.6 mm | 84.7 mm |
| Engine Compression Ratio | 8.5:1 | 10.5:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1400 kg | 1080 kg |
| Vehicle Length | 4710 mm | 4180 mm |
| Vehicle Width | 1780 mm | 1700 mm |
| Vehicle Height | 1410 mm | 1480 mm |
| Wheelbase Size | 2730 mm | 2610 mm |
| Fuel Tank Capacity | 60 L | 55 L |
