1965 Alfa Romeo 2600 vs. 2002 Chrysler Concorde
To start off, 2002 Chrysler Concorde is newer by 37 year(s). Which means there will be less support and parts availability for 1965 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1965 Alfa Romeo 2600 would be higher. At 3,516 cc (6 cylinders), 2002 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2002 Chrysler Concorde (251 HP @ 6400 RPM) has 108 more horse power than 1965 Alfa Romeo 2600. (143 HP @ 5900 RPM) In normal driving conditions, 2002 Chrysler Concorde should accelerate faster than 1965 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Concorde weights approximately 472 kg more than 1965 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler Concorde (340 Nm @ 3900 RPM) has 124 more torque (in Nm) than 1965 Alfa Romeo 2600. (216 Nm @ 4000 RPM). This means 2002 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1965 Alfa Romeo 2600. 2002 Chrysler Concorde has automatic transmission and 1965 Alfa Romeo 2600 has manual transmission. 1965 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1965 Alfa Romeo 2600 | 2002 Chrysler Concorde | |
| Make | Alfa Romeo | Chrysler |
| Model | 2600 | Concorde |
| Year Released | 1965 | 2002 |
| Engine Position | Front | Front |
| Engine Size | 2584 cc | 3516 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 143 HP | 251 HP |
| Engine RPM | 5900 RPM | 6400 RPM |
| Torque | 216 Nm | 340 Nm |
| Torque RPM | 4000 RPM | 3900 RPM |
| Engine Bore Size | 83 mm | 96 mm |
| Engine Stroke Size | 79.6 mm | 81 mm |
| Engine Compression Ratio | 9.0:1 | 9.9:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1146 kg | 1618 kg |
| Vehicle Length | 4410 mm | 5280 mm |
| Vehicle Width | 1660 mm | 1900 mm |
| Vehicle Height | 1310 mm | 1430 mm |
| Wheelbase Size | 2510 mm | 2880 mm |
| Fuel Tank Capacity | 85 L | 64 L |
