1965 Alfa Romeo 2600 vs. 2010 Chevrolet Silverado

To start off, 2010 Chevrolet Silverado is newer by 45 year(s). Which means there will be less support and parts availability for 1965 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1965 Alfa Romeo 2600 would be higher. At 5,999 cc (8 cylinders), 2010 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Silverado (323 HP @ 4400 RPM) has 180 more horse power than 1965 Alfa Romeo 2600. (143 HP @ 5900 RPM) In normal driving conditions, 2010 Chevrolet Silverado should accelerate faster than 1965 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Silverado weights approximately 115 kg more than 1965 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Chevrolet Silverado is four wheel drive (4WD), it will have significant more traction and grip than 1965 Alfa Romeo 2600. In wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Silverado will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Silverado (515 Nm @ 4200 RPM) has 299 more torque (in Nm) than 1965 Alfa Romeo 2600. (216 Nm @ 4000 RPM). This means 2010 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 1965 Alfa Romeo 2600. 2010 Chevrolet Silverado has automatic transmission and 1965 Alfa Romeo 2600 has manual transmission. 1965 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Silverado will be easier to drive especially in heavy traffic.

Compare all specifications:

1965 Alfa Romeo 2600 2010 Chevrolet Silverado
Make Alfa Romeo Chevrolet
Model 2600 Silverado
Year Released 1965 2010
Engine Position Front Front
Engine Size 2584 cc 5999 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 143 HP 323 HP
Engine RPM 5900 RPM 4400 RPM
Torque 216 Nm 515 Nm
Torque RPM 4000 RPM 4200 RPM
Engine Compression Ratio 9.0:1 9.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 6 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1146 kg 1261 kg
Vehicle Length 4410 mm 6580 mm
Vehicle Width 1660 mm 2440 mm
Vehicle Height 1310 mm 1940 mm
Wheelbase Size 2510 mm 4250 mm
Fuel Tank Capacity 85 L 129 L