1965 Alfa Romeo 2600 vs. 2010 Chrysler Town & Country
To start off, 2010 Chrysler Town & Country is newer by 45 year(s). Which means there will be less support and parts availability for 1965 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1965 Alfa Romeo 2600 would be higher. At 4,000 cc (6 cylinders), 2010 Chrysler Town & Country is equipped with a bigger engine. In terms of performance, 2010 Chrysler Town & Country (251 HP @ 6000 RPM) has 108 more horse power than 1965 Alfa Romeo 2600. (143 HP @ 5900 RPM) In normal driving conditions, 2010 Chrysler Town & Country should accelerate faster than 1965 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Town & Country weights approximately 950 kg more than 1965 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Town & Country, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Town & Country (351 Nm @ 4100 RPM) has 135 more torque (in Nm) than 1965 Alfa Romeo 2600. (216 Nm @ 4000 RPM). This means 2010 Chrysler Town & Country will have an easier job in driving up hills or pulling heavy equipment than 1965 Alfa Romeo 2600. 2010 Chrysler Town & Country has automatic transmission and 1965 Alfa Romeo 2600 has manual transmission. 1965 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Town & Country will be easier to drive especially in heavy traffic.
Compare all specifications:
1965 Alfa Romeo 2600 | 2010 Chrysler Town & Country | |
Make | Alfa Romeo | Chrysler |
Model | 2600 | Town & Country |
Year Released | 1965 | 2010 |
Engine Position | Front | Front |
Engine Size | 2584 cc | 4000 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 143 HP | 251 HP |
Engine RPM | 5900 RPM | 6000 RPM |
Torque | 216 Nm | 351 Nm |
Torque RPM | 4000 RPM | 4100 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1146 kg | 2096 kg |
Vehicle Length | 4410 mm | 5144 mm |
Vehicle Width | 1660 mm | 1953 mm |
Vehicle Height | 1310 mm | 1814 mm |
Wheelbase Size | 2510 mm | 3078 mm |
Fuel Tank Capacity | 85 L | 76 L |