1965 Alfa Romeo 2600 vs. 2010 Toyota Sienna

To start off, 2010 Toyota Sienna is newer by 45 year(s). Which means there will be less support and parts availability for 1965 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1965 Alfa Romeo 2600 would be higher. At 3,500 cc (6 cylinders), 2010 Toyota Sienna is equipped with a bigger engine. In terms of performance, 2010 Toyota Sienna (266 HP @ 6200 RPM) has 136 more horse power than 1965 Alfa Romeo 2600. (130 HP @ 5900 RPM) In normal driving conditions, 2010 Toyota Sienna should accelerate faster than 1965 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota Sienna weights approximately 495 kg more than 1965 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2010 Toyota Sienna, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Sienna (332 Nm @ 4700 RPM) has 144 more torque (in Nm) than 1965 Alfa Romeo 2600. (188 Nm @ 4000 RPM). This means 2010 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 1965 Alfa Romeo 2600. 2010 Toyota Sienna has automatic transmission and 1965 Alfa Romeo 2600 has manual transmission. 1965 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Toyota Sienna will be easier to drive especially in heavy traffic.

Compare all specifications:

1965 Alfa Romeo 2600 2010 Toyota Sienna
Make Alfa Romeo Toyota
Model 2600 Sienna
Year Released 1965 2010
Engine Position Front Front
Engine Size 2584 cc 3500 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 130 HP 266 HP
Engine RPM 5900 RPM 6200 RPM
Torque 188 Nm 332 Nm
Torque RPM 4000 RPM 4700 RPM
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1400 kg 1895 kg
Vehicle Length 4710 mm 5105 mm
Vehicle Width 1780 mm 1966 mm
Vehicle Height 1410 mm 1750 mm
Wheelbase Size 2730 mm 3030 mm
Fuel Tank Capacity 60 L 76 L