1965 Alpine A 110 vs. 1963 Isuzu Bellel

To start off, 1965 Alpine A 110 is newer by 2 year(s). Which means there will be less support and parts availability for 1963 Isuzu Bellel. In addition, the cost of maintenance, including insurance, on 1963 Isuzu Bellel would be higher. At 1,491 cc (4 cylinders), 1963 Isuzu Bellel is equipped with a bigger engine. In terms of performance, 1963 Isuzu Bellel (72 HP @ 5000 RPM) has 23 more horse power than 1965 Alpine A 110. (49 HP @ 5200 RPM) In normal driving conditions, 1963 Isuzu Bellel should accelerate faster than 1965 Alpine A 110. With that said, vehicle weight also plays an important factor in acceleration. 1963 Isuzu Bellel weights approximately 595 kg more than 1965 Alpine A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1965 Alpine A 110 1963 Isuzu Bellel
Make Alpine Isuzu
Model A 110 Bellel
Year Released 1965 1963
Engine Position Rear Front
Engine Size 956 cc 1491 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 49 HP 72 HP
Engine RPM 5200 RPM 5000 RPM
Engine Bore Size 65 mm 79 mm
Engine Stroke Size 72 mm 75 mm
Engine Compression Ratio 8.5:1 8.7:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 575 kg 1170 kg
Vehicle Length 3860 mm 4490 mm
Vehicle Width 1470 mm 1700 mm
Vehicle Height 1140 mm 1500 mm
Wheelbase Size 2140 mm 2540 mm
Fuel Tank Capacity 38 L 40 L